{"id":4231,"date":"2020-09-15T09:35:45","date_gmt":"2020-09-15T09:35:45","guid":{"rendered":"https:\/\/kmmb.es\/?p=4231"},"modified":"2020-09-15T09:35:45","modified_gmt":"2020-09-15T09:35:45","slug":"kmmb-entrega-un-vagon-klemm-kr-801-3-gs-miramar-gunitados-en","status":"publish","type":"post","link":"https:\/\/kmmb.es\/en\/2020\/09\/15\/kmmb-entrega-un-vagon-klemm-kr-801-3-gs-miramar-gunitados-en\/","title":{"rendered":"KMMB delivers a KLEMM KR 801-3 GS Miramar Gunitados, S.A."},"content":{"rendered":"

Miramar Gunitados, through KMMB, has added a new KLEMM drilling rig to its machine park, for the production of micropiles and anchors.<\/p>\n

The acquisition of the KR 801-3GS forms part of the fleet renewal process initiated by the Basque company in 2018 with the incorporation of the Klemm KR 805-3G.<\/p>\n

All this coincides with the 55th anniversary of the foundation of Miramar Gunitados, S.A. and the 30th anniversary of the foundation of the KMMB Group.<\/p>\n

\"\"<\/p>\n

After more than 25 years of commercial relationship and overcoming together such hard crises as the recent ones, both companies reinforce their mutual trust and close collaboration.<\/p>\n

With the launch of this new equipment, Miramar Gunitados now has 7 Klemm wagons in its fleet, despite having replaced three old Klemm equipment in recent years.<\/p>\n

Compact design.<\/strong><\/p>\n

With a new design and very small transport dimensions (6,680 mm long, 2,200 mm wide and 2,880 mm high), the KR 801-3GS is one of the most compact units on the market.<\/p>\n

\"\"Versatility and stability.
\n<\/strong><\/p>\n

The KR 801-3GS has a newly developed kinematics capable of working in very complicated positions.<\/p>\n

This equipment is capable of drilling ahead of the travel chain without taking up more space than the transport width.<\/p>\n

The equipment chassis is hydraulically swivelling. The chains are independent to ensure a good adaptation to the ground conditions.<\/p>\n

As is usual with the brand, the stability calculations for the loads and forces involved in the drilling process have been designed to give the KR 801-3GS an extraordinary stability, even without the need for external stabilizer jacks.<\/p>\n

The lower part of the engine and pump compartment is protected by a very thick plate that offers protection to the whole and stability to the machine.<\/p>\n

Production<\/strong><\/p>\n

The KR 801-3GS supplied to the Basque company is equipped with a newly developed KD 2117 head rotary percussion hammer offering up to 20.4 kNm of rotational torque and 750 Nm of impact energy.<\/p>\n

This data is typical of much heavier equipment, but the KR 801-3GS can be equipped with this hammer thanks to the robust design of the mast and arm of the German manufacturer’s equipment.<\/p>\n

Proven efficiency and respect for the environment<\/strong><\/p>\n

Klemm teams have been equipping variable flow pumps and the energy efficient Power Sharing system for many years.
\n\"\"<\/p>\n

Currently, all the equipment in the Klemm range is also equipped with the EEP system, with which consumption is being achieved far below the average of other brands.<\/p>\n

This system allows the hydraulic performance of the equipment to be optimised, adapting it to the operator’s production requirements.<\/p>\n

The EEP system is patented by the Bauer Group.<\/p>\n

The low noise level and lower energy consumption make the KR 801-3GS a device with a lower environmental impact.<\/p>\n

Other KR 801-3GS equipment<\/strong><\/p>\n

The German manufacturer offers many possibilities to configure the equipment according to the customer’s needs.<\/p>\n

The KR 801-3GS can be equipped with single or double rotation heads, hammer and rotation head, various types of jaws, etc.<\/p>\n

The unit delivered in Bilbao has the following equipment<\/p>\n